(item no. 4531778)
The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas and around large conductors. This AC current probe utilises the Rogowski principle, measuring currents from very low frequencies up to the 50th harmonic of a 50/60 Hz power supply. For use with Fluke 1750 Three Phase Power Quality Logger.
Specifications
Electrical Specifications | |
Measurement Range | 20 to 1000 A (with a crest factor ≤3) |
Frequency Range | 40 Hz to 5 kHz |
Accuracy at 77°F (25°C) | ±1% of reading |
Linearity (10 to 100% of Range) | ±0.2% of reading |
Temperature Coefficient | ±0.05% of reading per °C |
Position Sensitivity (with Cable >25 mm from the Coupling) | ±2% of reading |
External Field (with Cable >200 mm from the Head) | ±1% of reading |
Working Voltage (see Safety Standards) | 1000 V AC RMS or DC |
General Specifications | |
Probe Cable Length | 24″ (610 mm) |
Probe Cable Diameter | 0.3″ (8 mm) |
Transducer Bend Radius (Min) | 1.5″ (38.1 mm) |
Output Cable | 2 core screened, double insulated, 3 meters long |
Output Connector | LEMO 6 pin male connector |
Operating Temperature Range | -4 to 158°F (-20 to 70°C) (the temperature of the conductor under test shall not exceed 176°F (80°C)) |
Storage Temperature Range | -40 to 176°F (-40 to 80°C) |
Operating Humidity | 15 to 85% (non condensing) |
Altitude | Max 6562′ (2000 m) |
Degree of Ingress Protection | IP40 (IEC 60529) |