Fluke 5608 Secondary Reference PRTs with Calibration Options 100 OHM, 9IN 90 DEG BEND Fluke FCAL PCT

€ 0,00

SKU: us_1958898892866 Category: Temperature Probes Tags: badgefree-freeshipping, Brand-Fluke-FCAL-PCT, Measuring, Probes, Temperature, Temperature Probes

Description
shopping

(item no. 3316329)

PRODUCT OVERVIEW

If you want a very stable thermometer from –200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion.

The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from –200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application.

The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm.

When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem.

Both of these probes have Inconel™ sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts.

As standard, each probe includes its resistance value at the triple point of water. If calibration is desired, you can order a NVLAP-accredited calibration from our laboratory; lab code 200348-0. On the report of calibration, you’ll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer. If you order your probe with a smart connector.

FEATURES

5608: –200 °C to 500 °C (80 mm minimum immersion)
5609: –200 °C to 670 °C (100 mm minimum immersion)
Calibration not included, NVLAP-accredited calibration optional, lab code 200348-0
Dry-well reference with 90 ° bend

SPECIFICATIONS

Temperature range

5608: –200 °C to 500 °C
5609: –200 °C to 670 °C

Nominal resistance at 0.01 °C

100 Ω ± 0.5 Ω

Temperature coefficient

0.0039250 Ω/Ω/°C

Relative Accuracy^[1]

± 0.007 °C at –200 °C
± 0.008 °C at 0 °C
± 0.020 °C at 420 °C
± 0.027 °C at 660 °C

Short-term repeatability^[2]

± 0.007 °C at 0.010 °C
± 0.013 °C at max temp

Drift^[3]

± 0.01 °C at 0.010 °C
± 0.02 °C at max temp

Hysteresis

± 0.01 °C maximum

Sensor length

30 mm ± 5 mm (1.2 in ± 0.2 in)

Sensor location

3 mm ± 1 mm from tip (0.1 in ± 0.1 in)

Sheath material

Inconel™ 600

Minimum insulation resistance

5608: 500 MΩ at 23 °C, 20 MΩ at 500 °C
5609: 500 MΩ at 23 °C, 10 MΩ at 670 °C

Transition junction temperature range^[4]

–50 ºC to 200 °C

Transition junction dimensions

71 mm x 12.5 mm (2.8 in x 0.49 in)

Minimum immersion length^[5]
(<5 mK error)

5608: 80 mm (3.1 in)
5609: 100 mm (3.9 in)

Maximum immersion length

305 mm (12 in)

Response time^[5]

5608: 9 seconds typical
5609: 12 seconds typical

Self heating (in 0 °C bath)

5608: 75 mW/°C
5609: 50 mW/°C

Lead-wire cable type

PTFE 24 AWG

Lead-wire length

1.8 m (6 ft)

Lead-wire temperature range

–50 °C to 250 °C

Calibration

Calibration not included; NVLAP-accredited calibration optional, lab code 200348-0. Please see calibration uncertainty table and its explanation of changeable uncertainties.

^[1] Includes short-term repeatability and 100 hr drift. Calibration will add additional uncertainties.

^[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)

^[3]After 100 hours at max temp, 95 % confidence (k=2)

^[4] Temperatures outside this range will cause irreparable damage. For best performance, transition junction should not be too hot to touch.

^[5] Per ASTM E 644

Calibration Uncertainty for optional NVLAP-accredited† calibration
Temperature	Expanded Uncertainty (k=2)
–197 °C	0.025 °C
–80 °C	0.025 °C
–38 °C	0.025 °C
0.01 °C	0.025 °C
156 °C	0.030 °C
231 °C	0.030 °C
419 °C	0.035 °C
660 °C	0.050 °C
Note: Calibration uncertainties depend on the uncertainties of the lab performing the calibration. Subsequent calibrations of this probe performed with different processes, at different facilities, or with changed uncertainty statements may state different uncertainties. †Lab code 200348-0

MODELS AND ACCESSORIES

Model Name	Description
5608-9-X	Secondary Reference PRT, 9 in x 1/8 in, –200 to 500 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5608-12-X	Secondary Reference PRT, 12 in x 1/8 in, –200 to 500 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-12-X	Secondary Reference PRT, 12 in x 1/4 in, –200 to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-20-X	Secondary Reference PRT, 20 in x 1/4 in, –200 to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-300-X	Secondary Reference PRT, 300 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-400-X	Secondary Reference PRT, 400 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-500-X	Secondary Reference PRT, 500 mm x 6 mm, –200 to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).
5609-9BND	Secondary Reference PRT, 15 in x 1/4 in, 9 in bend, –200 °C to 670 °C, lead wire (cable) 6 ft (No calibration included. See recommended calibration options below. Contact your Fluke Calibration representative for additional calibration options.) X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).

Fast Shipping and Professional Packaging

Thanks to our longstanding association with UPS FedEx DHL as well as other leading global carriers, we can provide various shipping options. Our warehouse staff is highly skilled and will wrap your goods according to our precise and accurate specifications. Prior to shipping, your goods will be thoroughly examined and secured. Every day we ship thousands of packages to clients from all over the world. The fact that we're dedicated to becoming the largest online retailer in the World is obvious. The warehouses are located located in Europe just as they are in the USA.

Note: Orders with more than one product are assigned a specific processing time dependent on the particular item.

Before shipping, we will check the item thoroughly before sending the items. Most orders are now shipped within 48 hrs. The expected delivery time is 3 to 7 days.

Returns

The inventory is constantly changing and we are unable to control it completely because of the fact that many parties are involved, which includes our factory and warehouse. The stock can change at any time. Please be aware that it is possible for your order to become unavailable even after you have placed the order.

Our policy lasts for thirty days. We cannot return or exchange your purchase when it's been 30 days from the date of purchase.

You are able to return a product when it's unopened and is in the same condition the day you received it. The item should be returned in its original packaging.

Fluke 5608 Secondary Reference PRTs with Calibration Options 100 OHM, 9IN 90 DEG BEND Fluke FCAL PCT

(item no. 3316329)

PRODUCT OVERVIEW

FEATURES

SPECIFICATIONS

Calibration Uncertainty for optional NVLAP-accredited† calibration

MODELS AND ACCESSORIES

Related products

Login