Sale!

flukethreephasepowerqualityloggerwith60cm3000aiflexlasermanatanaffordablepriceandoutstandingserviceforallofourloyalcustomers0.png

Fluke Three-phase Power Quality Logger with 60cm 3,000A iFlex Laserman

Name: Fluke Three-phase Power Quality Logger with 60cm 3,000A iFlex Laserman at an affordable price and outstanding service for all of our loyal customers
SKU: us_1974949838914
Price: 2290.75 EUR
Availability: InStock

Original price was: € 9.163,00.Current price is: € 2.290,75.

Item

Clear

SKU: us_1974949838914 Category: Power Quality Tags: badgefree-freeshipping, Brand-Fluke-Industrial, Electrical-Equipment, Industrial, Power-Quality

Three-phase Power Quality Logger with 60cm 3,000A iFlex

(Fluke Registration required before purchase. Please contact Laserman for more information on 08 9335 1718 )

(item no. 4920651, 4920715, 4920771)

A compact and rugged three-phase power quality logger for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage, and analyse power distribution systems. This unit enables you to log over 500 different parameters for each averaging period. Additionally, it comes with four 3000 A current probes.

Fully compliant with international power quality standards such as IEC 61000-4-30 and capable of simultaneously logging up to 500 parameters while also capturing events, this unit helps uncover intermittent and hard-to-find power quality issues more easily than ever. It comes equipped with an Energy Analyse plus software which quickly assesses the quality of power at the service entrance, substation, or at the load, according to national and international standards like EN 50160 and IEEE 519.

Features

Software Features

“In-workshop” or “in-the-field” setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable.
Energy Analyze plus application software: Download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting.
One-touch reporting: Create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software.
Advanced analysis: Choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data.

Hardware Features

Measure all three voltage and current phases plus the neutral current: Three-phase and neutral voltage leads and four flexible current probes.
Comprehensive logging: More than 20 separate logging sessions can be stored in the instrument. A comprehensive range of power and power quality variables are automatically logged so you never lose measurement trends.
Measure with premium accuracy: Meets the rigorous IEC 61000-4-30 Class A Edition 3 standard for ‘Testing and measurement techniques–Power quality measurement methods.’
Capture dips, swells and interruptions: The 1748 includes event waveform capture and RMS event profile, along with date, timestamp and severity information to help pinpoint potential root causes of power quality issues.
Measure key power quality parameters: Measures harmonics and inter-harmonics for voltage and current, also includes unbalance, flicker and rapid voltage changes.
Optimised user interface: Capture the right data every time with quick, guided, graphical PC based application setup and reduce uncertainty about your connections with an intelligent verification feature and the only auto-correction function for a power quality logger. Connection errors are automatically indicated via an amber light on the units power button which turns green once corrected.
Optimised user interface: Quick, guided, graphical setup ensures you’re capturing the right data every time, and the intelligent verification function indicates correct connections have been made, reducing user uncertainty
Flexible power supply: Powers directly from the measured circuit with the widest available range for a power quality logger automatically going from 100 V to 500 V or from a wall line cord, so you can test anywhere.
Rugged and reliable: Designed to withstand harsh installation environments with IP65 rating when used with IP65 voltage input adapter.
Two external USB ports: One for PC connection and another for quick, simple data download to standard USB thumb drives, or other USB devices, allowing you to leave the measurement device in place without disrupting logging.
Ethernet connectivity: Wired and wireless connections for instrument setup and high-speed data download.
Compact size: Designed to fit in tight spaces and panels with small 23 cm x 18 cm x 5.4 cm (9.1 in x 7.1 in x 2.1 in) footprint.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.
Optimised measurement accessories: Unique tangle-free flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces.
Battery life: Four-hour operating time (backup time) per charge on lithium-ion battery to withstand temporary power disruptions.
Security: Safeguard your best asset from theft with a standard chain or other security device.
Magnetic hanger kit: Conveniently stow the instrument safely inside or outside of electrical panels; compatible with all models and included with 1748 model as standard.

Which power quality logger is right for you?

Features	1742	1746	1748
Functions
Voltage, current, power, power factor, frequency	•	•	•
Energy forward/reverse	•	•	•
Peak Demand	•	•	•
THD	•	•	•
Flicker	•	•	•
Voltage and current harmonics (to 50th)¹		•	•
Unbalance¹		•	•
Rapid voltage change events¹		•	•
Interharmonics (to 50th)¹		•	•
Dips, swells, interruption and transient events tables¹		•	•
Inrush current¹		•	•
Transients (low frequency) / Waveform deviation events²			•
Recording
Trend	•	•	•
Waveform snapshots²			•
RMS profile²			•
Communication
Ethernet	•	•	•
USB (mini B)	•	•	•
WiFi download Instrument to device	•	•	•
Wifi download via WiFi hub (requires registration)	Opt.	Opt.	Opt.
Included accessories
Flexible current probe	not /B version	not /B version	not /B version
USB stick	•	•	•
USB cable	•	•	•
3PHVL-1730 3-Phase + neutral voltage test lead	•	•	•
Test lead set red/black 0.18 m	•	•	•
Test lead set red/black 1.5 m	•	•	•
Alligator clips	4	4	4
173x/174x Soft Case	•	•	•
Cable marker kit	•	•	•
MP1-3R/1B-Magnet Probe 1 set (3 red, 1 black)	Opt.	1	1
174x-Hanger Kit	Opt.	Opt.	•

Specifications: Fluke 1742, 1746 and 1748 Three-Phase Power Quality Loggers

Specifications
Accuracy
Parameter		Range	Maximum Resolution	Intrinsic Accuracy at Reference Conditions (% of Reading +% of Range)
Voltage		1000 V	0.1 V	±0.1 % of nominal voltage ^{1, 2}
Current: Direct input	i17xx-flex 1500IP 24 1500 A	150 A	0.01 A (min. 1.5A)³	±(1% + 0.02%)
		1500 A	0.1 A
	i17xx-flex 3000IP 24 3000 A	300 A	0.01 A (min. 3.0 A)³	±(1% + 0.03%)
		3000 A	0.1 A
	i17xx-flex 6000IP 36 6000 A	600 A	0.01 A (min. 6.0 A)³	±(1.5% + 0.03%)
		6000 A	0.1 A
	i40s-EL clamp	4 A	1 mA	±(0.7% + 0.02%)
		40 A	10 mA
Frequency		42.5 Hz to 69 Hz	0.01 Hz	±(0.1%)²
Auxiliary input		±10 V dc	0.1 mV	±(0.2% + 0.02%)
Voltage min/max		1000 V	0.1 V	±0.2 % of nominal input voltage¹
Current min/max		Defined by accessory	Defined by accessory	±(5% + 0.2%)
THD on voltage		1000%	0.10%	± 2.5%
THD on current		1000%	0.10%	± 2.5%
Voltage harmonics 2nd to 50th		1000 V	0.1 V	≥ 1 V: ±5% of reading
				< 1 V: ±0.05V
Current harmonics 2nd to 50th		Defined by accessory	Defined by accessory	≥ 3% of current range: ±5% of reading
				< 3% of current range: ±0.15% of range
Flicker P_LT, P_ST		0 to 20	0.01	5%
Current probe accuracy
Parameter	Influence quantity/	iFlex1500IP-24	iFlex3000IP-24	iFlex6000IP-36	i40S-EL
		150 A / 1500 A	300 A / 3000 A	600 A / 6000 A	4 A / 40 A
Active Power P	PF ≥ 0.99	1.2% + 0.005%	1.2% + 0.0075%	1.7% + 0.0075%	1.2% + 0.005%
Active Energy E_a
Apparent power S	0 ≤ PF ≤ 1	1.2% + 0.005%	1.2% + 0.0075%	1.7% + 0.0075%	1.2% + 0.005%
Apparent Energy E_ap
Reactive power Q	0 ≤ PF ≤ 1	2.5% of measured apparent power
Reactive Energy E_r
Power Factor PF	–	±0.025
Displacement Power
Factor DPF/cosΦ
Additional uncertainty in% of range	V_P-N>250 V	0.015%	0.023%	0.023%	0.015%
¹ In the range of 100 V … 500 V; also known as Udin ² 0 °C … 45 °C: Intrinsic accuracy x 2, outside of 0 °C … 45 °C: Intrinsic accuracy x 3 ³ Consult operators manual for details Reference conditions: Environmental: 23 °C ± 5 °C, instrument operating for at least 30 minutes, no external electrical/magnetic field, RH <65 % Input conditions: Cosφ/PF=1, Sinusoidal signal f=50 Hz/60 Hz, power supply 120 V/230 V ±10 %. Current and power specifications: Input voltage 1 ph: 120 V/230 V or 3 ph wye/delta: 230 V/400 V Input current: I > 10 % of I range Primary conductor of clamps or Rogowski coil in center position Temperature coefficient: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

Electrical Specifications
Power Supply
Voltage range	100 V to 500 V using safety plug input when powering from the measurement circuit
Voltage range	100 V to 240 V MA-C8 and using standard power cord (IEC 60320 C7)
Power consumption	Maximum 50 VA (max. 15 VA when powered using MA-C8 adapter)
Efficiency	≥ 68.2% (in accordance with energy efficiency regulations)
Maximum no-load consumption	< 0.3 W only when powered using IEC 60320 input
Mains power frequency	50/60 Hz ±15%
Battery	Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-battery runtime	Typically 4 hours
Charging time	< 6 hours
Data Acquisition
Resolution	16-bit synchronous sampling
Sampling frequency	10.24 kHz at 50/60 Hz, synchronized to mains frequency
Input signal frequency	50/60 Hz (42.5 to 69 Hz)
Circuit types	1-Φ, 1-Φ IT, split phase, 3-Φ delta, 3-Φ wye, 3-Φwye IT, 3-Φ wye balanced, 3-Φ Aron/Blondel (2-element delta), 3-Φ delta open leg, currents only (load studies)
Data storage	Internal flash memory (not user replaceable)
Memory size	Typical 20 logging sessions of 4 weeks with 1-minute intervals and 500 events
Basic Interval
Measured parameters	Voltage, current, aux, frequency, THD V, THD A, power, power factor, fundamental power, DPF, energy
Averaging interval	User selectable: 1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min
Averaging time min/max values	Voltage, Current: Full cycle RMS updated every half cycle (URMS1/2 according to IEC61000-4-30 Aux, Power: 200ms)
Demand Interval (Energy Meter Mode)
Measured parameters	Energy (Wh, varh, VAh), PF, maximum demand, cost of energy
Interval	User selectable: 5 min, 10 min, 15 min, 20 min, 30 min, off
Power Quality Measurements
Measured parameter	Voltage, frequency, unbalance, voltage harmonics, THD V, current, harmonics, THD A, TDD, voltage interharmonics, TID V, current interharmonics, TID A, Flicker, Mains Signaling, under/over deviation
Averaging interval	10 min for all parameters 2 hrs (long term Flicker PLT) 150/180 cycles (3 s) for harmonics (requires software license IEEE519/REPORT)
Individual harmonics	2nd to 50th harmonic Grouping according to IEC 61000-4-7 user configurable depending on application: Sub-grouped (harmonics + interharmonics), grouped or harmonic bins only
Interharmonics	1st to the 50th interharmonic
Total harmonic distortion	Calculated on 50 voltage harmonics
Events	Voltage: dips, swells, interruptions, current: inrush current 1748: mains signaling, transients (low frequency)
Triggered recordings	RMS profile: Full cycle RMS updated every half cycle of voltage and current up to 11 s (URMS1/2 according to IEC 61000-4-30)
	Waveform of voltage and current up to 200 ms, 10/12 cycles
	Mains signaling: 10/12 cycle RMS recording of the configured frequencies up to 120s
Inrush	RMS profile based on 1/2 cycle RMS steady state triggering
Flicker	In accordance with IEC 61000-4-15 and IEEE 1453
Mains signaling	Two user defined frequencies up to 3 kHz
PQ Health	Summarizes power quality measurements in one table. Detailed data available for each parameter
EN 50160	Compliance with standard
Programmable PQ limits	Enables user defined limits for local standards compliance
Standards Compliance
Harmonics	IEC 61000-4-7: Class 1
Harmonics	IEEE 519 (short time and very short time harmonics)
Power quality	IEC 61000-4-30 Class A, IEC 62586-1, IEC 62586-2 (PQI-A-PI device)
Power	IEEE 1459
Power quality compliance	EN 50160
Safety	General: IEC 61010-1: Pollution Degree 2
	Measurement: IEC 61010-2-033: CAT IV 600 V / CAT III 1000 V
	Power Supply: Overvoltage Category IV, Pollution Degree 2
	Li-ion Battery: IEC 62133
Interfaces
USB-A	File transfer via USB flash drive, firmware updates, max. supply current: 120 mA
WiFi	File transfer and remote control via direct connection or WiFi infrastructure
Bluetooth	Read auxiliary measurement data from Fluke Connect® 3000 series modules (requires supported USB to BLE or WiFi/BLE adapter, check for availability)
USB-mini	Data download device to PC
Voltage Inputs
Number of inputs	4 (3 phases referenced to neutral)
Maximum input voltage	1000 Vrms, CF 1.7
Input impedance	10 MΩ
Bandwidth	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Measurement category	1000 V CAT III/600 V CAT IV
Current Inputs
Number of inputs	4 (3 phases and neutral), mode selected automatically for attached sensor
Input voltage	Clamp input: 500 mVrms/50 mVrms; CF 2.8
Input voltage	Rogowski coil input: 150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4 all at nominal probe range
Range	1 A to 150 A/10 A to 1500 A with thin flexible current probe i17XX-flex1500 IP 24
	3 A to 300 A/30 A to 3000 A with thin flexible current probe i17XX-flex3000 IP 24
	6 A to 600 A/60 A to 6000 A with thin flexible current probe i17XX-flex6000 IP 36
	40 mA to 4 A/0.4 A to 40 A with 40 A clamp i40s-EL
Bandwidth	42.5 Hz – 3.5 kHz
Scaling	1:1 and variable
Auxiliary Inputs
Number of inputs	2 (Analog with auxiliary adapter, or up to 2 BLE devices simultaneously)
Input range	0 to ± 10 V dc, or 0 to ± 1000 V dc (with optional adapter), 1 reading/s
Scale factor	Format: mx + b (gain and offset) user configurable
Displayed units	User configurable (7 characters, for example, °C, psi, or m/s)
Wireless Bluetooth connection (check for availability)
Number of inputs	2
Supported modules	Fluke Connect® 3000 series
Acquisition	1 reading/s
Environmental Specifications
Operating temperature	-25 °C to +50 °C (-13 °F to 122 °F)¹
Storage temperature	Without battery: -25 °C to +60 °C (-13 °F to 140 °F), with battery: -20 °C to +50 °C (−4 °F to 122 °F)
Operating humidity	IEC 60721-3-3: 3K6:
	-25 °C to +30 °C (-13 °F to +86 °F): ≤ 100 %
	40 °C (104 °F): 55 %
	50 °C (122 °F): 35 %
Operating altitude	2000 m (up to 4000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV)
Storage altitude	12,000 m
Enclosure	IEC 60529: IP50
Enclosure	IEC 60529: IP65 with IP65 rated voltage connector
Vibration	IEC 60721-3-3 / 3M2
Electromagnetic compatibility (EMC)	EN 61326-1: Industrial CISPR 11: Group 1, Class A
	IEC 61000-6-5 Power station environment
	Korea (KCC): Class A Equipment (industrial broadcasting and communication equipment)
	USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
General Specifications
Warranty	Two-years (battery not included)
	Accessories: one-year
	Calibration cycle: two-years
Dimensions	23.0 cm x 18.0 cm x 5.4 cm (9.1 in x 7.1 in x 2.1 in)
Weight	Instrument: 1 kg (2.2 lb)
Tamper protection	Accept securing cables (max. Φ 6mm)
¹Warm up the product to -10 °C (+14 °F) before you power the unit on
i17XX-FLEX1.5KIP Flexible Current Probe Specifications
Measuring range	1 to 150 A ac/10 to 1500 A ac
Probe cable length	610 mm (24 in)
Probe cable diameter	7.5 mm (0.3 in)
Weight	170 g (0.38 lb)
Minimum bending radius	38 mm (1.5 in)
Nondestructive current	100 kA (50/60 Hz)
Temperature coefficient over operating temperature range	0.05 % of reading/°C (0.028 % of reading/°F)
Working voltage	1000 V CAT III, 600 V CAT IV
Output cable length	2.0 m (6.5 ft)
Probe cable material	TPR
Weight	115 g
Probe cable material	TPR
Coupling material	POM + ABS/PC
Output cable	TPR/PVC
Operating temperature	-20 °C to +70 °C (-4 °F to 158 °F) temperature of conductor under test shall not exceed 80 °C (176 °F)
Temperature, non-operating	-40 °C to +80 °C (-40 °F to 176 °F)
Relative humidity, operating	15% to 85% non-condensing
IP rating	IEC 60529: IP65
Warranty	One-year

Manuals

1742/1746/1748 | Users manual
1742/1746/1748 | Users manual supplement
1742, 1746, 1748 | Statement of memory volatility
1742/1746/1748 | Quick reference guide
1742/1746/1748 | Safety sheet

Item	FLUKE-1746/30/EUS, FLUKE-1742/30/EUS, FLUKE-1748/30/EUS

Fast Shipping and Professional Packaging

Thanks to our longstanding association with UPS FedEx DHL as well as other leading global carriers, we can provide various shipping options. Our warehouse staff is highly skilled and will wrap your goods according to our precise and accurate specifications. Prior to shipping, your goods will be thoroughly examined and secured. Every day we ship thousands of packages to clients from all over the world. The fact that we're dedicated to becoming the largest online retailer in the World is obvious. The warehouses are located located in Europe just as they are in the USA.

Note: Orders with more than one product are assigned a specific processing time dependent on the particular item.

Before shipping, we will check the item thoroughly before sending the items. Most orders are now shipped within 48 hrs. The expected delivery time is 3 to 7 days.

Returns

The inventory is constantly changing and we are unable to control it completely because of the fact that many parties are involved, which includes our factory and warehouse. The stock can change at any time. Please be aware that it is possible for your order to become unavailable even after you have placed the order.

Our policy lasts for thirty days. We cannot return or exchange your purchase when it's been 30 days from the date of purchase.

You are able to return a product when it's unopened and is in the same condition the day you received it. The item should be returned in its original packaging.