everyclientistreatedlikefamilyhelpingpeopletofindthefluke1750tfet3phasepowerrecorderwfour1000aflexiblecurrentprobesitemno4871393flukeindustrial0.jpg

Fluke 1750-TF/ET 3-phase Power Recorder, W/ Four 1000a Flexible Current Probes (item no. 4871393) Fluke Industrial

€ 0,00

SKU: us_1974953115714 Category: Power Quality Tags: badgefree-freeshipping, Brand-Fluke-Industrial, discontinued, Electrical-Equipment, Industrial, Power-Quality

Description
shopping

DISCONTINUED ITEM. Please contact Laserman for more information on 08 9335 1718 )

(item no. 4871393)

Record every power quality parameter, every cycle, all the time

Setting up a power quality analyser to capture detailed power quality data has never been easier that it is with the Fluke 1750. The only things you need to know are the system voltage, frequency and the power configuration (delta or wye). The analyser then captures the most important data for up to 30 days without losing the most important details. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Once the data is captured download via Ethernet or directly to 2GB SD card (without the need of any other device). The Fluke 1750 features a wireless front panel for viewing measurements, data and setting up, implemented via a tablet computer using Bluetooth communication.

Applications

Long-term analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction
Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports
Quality of service compliance: Validate incoming power quality at the service entrance
Equipment Installation/Commissioning: Benchmark: power system prior to install to insure quality of service
- Long-Term Analysis – Uncover hard-to-find or intermittent issues.
- Load Studies – Verify the available electrical system capacity before adding loads.

Features

Power quality that meets the standard All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
Quick and reliable configuration A tablet computer provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
Threshold-free set up Apply thresholds after data is collected with Fluke Power Analyse Software – no need to worry about missed information due to incorrect setups
Captures everything Cross-channel and current triggering capture every measurement, on every channel, every time
Intuitive PC software Easily analyse data and generate reports with automated EN50160 reporting and compliance
Reporting has never been easier Auto Report creates either standard reports or customised reports with the minimum effort or hassle. Export reports to almost any format including RTF (Rich Text Format) for editing in Microsoft Word.
Plug and play Set up in minutes with self-identifying current probes and single-lead voltage connections
No need to reconnect wires Swap channels internally with the wireless PDA or PC when connections are not correct
Measure every parameter Voltage and current on three phases, neutral, and ground
5 MHz, 8000 Vpk waveform capture Get a detailed picture of even the shortest events
Quickly retrieve data With included SD memory card or via the 100 BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument

Specifications: Fluke 1750-TF Three-Phase Power Quality Recorder

Technical Specifications
Power quality measurement standards	Conformance	IEC 61999-1-4 Class 1, IEC 61000-4-30 Class A, S or B depending on measurement function, IEEE519, IEEE1159, IEEE1459 and EN50160
	Clock/calendar	Leap years, 24-hour clock
	Real-time clock accuracy	Not more than ±1 s/day
	Internal memory capacity for data	At least 2 GB
	Maximum recording period	At least 31 days
	Measurement time control	Automatic
	Maximum number of events	Limited only by the size of the internal memory
	Power requirements	100 to 240 Vrms ±10%, 47-63 Hz, 40 W
	Operating time during interruptions (internal UPS operation)	5 minutes per interruption, 60 minutes total operating time without recharging
	Dimensions	215 x 310 x 35 mm (8.5 x 12.2 x 3.5 in)
	Mass (weight)	6.3 kg (14 lb)
Input	Measurement types	One Phase Plus Neutral, One Phase IT No Neutral, One Phase Split Phase, Three Phase Wye, Three Phase Delta, Three Phase IT, Three Phase High Leg, Three Phase Open Leg, 2 Element Delta, 21/2 Element Wye
	Input channels	Voltage: 4 channels, AC/DC
	Input channels	Current: 5 channels
	Voltage channels	Input resistance: 2 MΩ
	Voltage channels	Input capacitance: < 20 pF
	Current input characteristics	2 Vrms = full scale, 1 MΩ Input Impedance for ferro CTs, low impedance for Flexi-CTs
	Measuring method	Simultaneous digital sampling of voltage and current. Digital PLL synchronised sampling, internal frequency reference used during voltage drops.
Synchronisation and sampling	synchronisation source	The PLL synchronises to the A-N voltage for wye power types, and to the A-B voltage for delta power types. All listed power types can be characterised as either wye or delta.
	PLL lock range	42.5 to 69 Hz
	Sampling frequency	Voltage and current: 256 samples/cycle Inter-harmonics per IEC 61000-4-7: 2560 points / 10 cycles (50 Hz), 3072 points / 12 cycles (60 Hz) Transient Voltage: 5 MHz
	A/D resolution	Voltage and current: 24 bits
		Transient voltage: 14 bits
Voltage and current measurements	Voltage measurement range	AC voltage: 1000 Vrms ±10% over range
	Voltage measurement range	DC voltage: ±1000 V + 10% over range
	Voltage crest factor	3 or less
	Current measurement range	Depends on current probe used
	Current crest factor	4 or less
RMS voltage	Measurement type	True RMS calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by IEC 61000-4-30.
	Measurement uncertainty	AC: ±0.2% reading ±0.1% full scale, above 50 Vrms
	Measurement uncertainty	DC: ±0.5% reading ±0.2% full scale, above 50 VDC
RMS current	Measurement type	True RMS calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
Transient voltage (impulse)	Measurement type	Waveshape sampling
	Full scale	8000 V pk
	Sample resolution	200 nS
	Measurement uncertainty	±5% reading ±20 V (test parameters: 1000 VDC, 1000 Vrms, 100 kHz)
Voltage swell (rms swell)	Measurement type	True RMS (one cycle calculation by overlapping each half cycle – voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
	Displayed data	Amplitude and duration of swell
	Measurement	Same as rms voltage
Voltage dip (rms sag)	Measurement type	True RMS (one cycle calculation by overlapping each half cycle – voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
	Displayed data	Amplitude and duration of dip or interruption
	Measurement	Same as rms voltage
Voltage dropout (interruption)	Measurement type	Same as voltage dip
LAN interface	Connector	RJ-45
	Speed and type	10/100 Base-T, auto MDIX
	Communications protocol	TCP/IP over Ethernet
Wireless controller interface	Connection	wireless (2.4 GHz radio)
	Speed	up to 700 kbit/second
	Communications protocol	Bluetooth SPP
Power Measurements
Power, battery life	Measurement type	True RMS calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
Frequency	Measurement range	42.5 to 69 Hz
	Measurement source	Same as PLL synchronisation source
	Measurement accuracy	±10 mHz (10 to 110% of range, with sine wave)
Power factor	Measurement range	0.000 to 1.000
Power factor	Measurement accuracy	±1 digit from the calculation of each measured value (±3 digits for total)
Displacement power factor	Measurement method	Calculated from the phase difference between voltage fundamental and current fundamental
	Measurement range	– 1.000 (leading) to + 1.000 (lagging)
	Measurement accuracy	±0.5% reading ±2% full scale ±1 digit
Voltage unbalance and phase sequence	Measurement method	Positive sequence voltage divided by negative sequence voltage, per IEC 61000-4-30
Harmonic voltage and current	Analysis window	rectangular
	Analysis order	1st to 50th order
	Measurement accuracy	Voltage / Current: 1st to 20th orders: ±0.5% reading ±0.2% full scale, 21st to 50th orders: ±1% reading ±0.3% full scale (current sensor accuracy must be included for current and power)
	Measurement method	IEC 61000-4-7
Inter-harmonic voltage and current (intermediate harmonics)	Analysis window	rectangular
	Analysis orders	1.5 to 49.5th order
	Measurement method	IEC 61000-4-7
Flicker	Measurement method	IEC 61000-4-15
	Measurement method	Plt for 2 hours and Pst for 10 minutes
	Measuring range	0, 1 to 5 (25) depending on voltage level, modulation and frequency
Environmental Specifications
Environmental	Operating environment	Indoors or in covered area outdoors, up to 2000 m altitude
	Storage temperature and humidity	-20°C to 50°C, 80% RH max, non-condensing
	Operating temperature and humidity	0°C to 40°C, 80% RH max, non-condensing
Maximum rated working voltage	Voltage terminals	1100 Vrms
	Voltage durability	5550 Vrms AC for 1 minute, between voltage input terminals, voltage input terminals and current probes, and voltage input terminals and case (50/60 Hz, 1 mA sense current)
	Enclosure protection	IP30 (per EN 60529)
Standards	EMC	EN 61326-1:1997+A1:1998 Class A
		EN 61000-3-2:1995+A1:1998+A2:1998
		EN 61000-3-3:1995
	Safety	EN 61010-1 2 nd Edition; 2 000
	Safety	Voltage input unit: Contamination Level 2 , Overvoltage Category 1000 V CAT III, 600 V CAT IV (anticipated overvoltage: 8000 V)

Includes:

1750 acquisition unit
1750 handheld tablet
5 Test leads and clips
2GB SD Memory card (larger cards not compatible)
Fluke Power View and Fluke Power Analyse software
Power cord with international plug set
Ethernet cable
Color localisation set
Printed Getting Started manual
Product CD with software and user manual PDF
CS 1750/1760 Rugged transit softcase

Manuals

1750 | Statement of memory volatility
1750 | Operators manual
1750 | Getting started
1750 | Calibration manual
3005-PR | Instruction sheet
3014-PR | Instruction sheet
3110-PR | Instruction sheet
3140R | Instruction sheet
3210-PR | Instruction sheet
3210-PR-TF-II | Instruction sheet
3310-PR-TF-II/3312-PR-TF-II | Instruction sheet
3310-PR/3312-PR | Instruction sheet
i40s-PR 1750 40A | Instruction sheet
i5s-PR 1750 5A | Instruction sheet

Fast Shipping and Professional Packaging

Thanks to our longstanding association with UPS FedEx DHL as well as other leading global carriers, we can provide various shipping options. Our warehouse staff is highly skilled and will wrap your goods according to our precise and accurate specifications. Prior to shipping, your goods will be thoroughly examined and secured. Every day we ship thousands of packages to clients from all over the world. The fact that we're dedicated to becoming the largest online retailer in the World is obvious. The warehouses are located located in Europe just as they are in the USA.

Note: Orders with more than one product are assigned a specific processing time dependent on the particular item.

Before shipping, we will check the item thoroughly before sending the items. Most orders are now shipped within 48 hrs. The expected delivery time is 3 to 7 days.

Returns

The inventory is constantly changing and we are unable to control it completely because of the fact that many parties are involved, which includes our factory and warehouse. The stock can change at any time. Please be aware that it is possible for your order to become unavailable even after you have placed the order.

Our policy lasts for thirty days. We cannot return or exchange your purchase when it's been 30 days from the date of purchase.

You are able to return a product when it's unopened and is in the same condition the day you received it. The item should be returned in its original packaging.