Fluke T6-1000 + Prv240fs Proving Unit Kit (item no. 5069992) Fluke Industrial

(item no. 5069992)

Product Overview

Ideal for commercial and light industrial electricians, this kit measures voltage up to 1000 V AC. Additionally, it comes equipped with an electrical tester and a proving unit kit which is built to prove the functionality of the FieldSense and provides ac and dc voltages for other HiZ instruments.

Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.

 

Features

• FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
• Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
• 1 to 1000 V ac or dc
• 0.1 to 200 A ac
• Resistance 1 Ω to 100 kΩ
• Frequency measurement 45 to 66 Hz
• Works with wires up to AWG 4/0 (120 mm2) with a 0.7″ (17.8 mm) jaw opening
• Hold button temporarily freezes the reading for easy viewing
• Easy to read display with backlight

Fluke PRV240FS Proving Unit

Reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification (PPE is still needed for absence of voltage testing when appropriate).

Features

• Sources both ac and dc steady-state voltage – supplies 240 V dc/ac
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Long battery life – 5000 tests per set of four AA batteries

Fluke T6-1000 Offers

Measure voltage … without test leads

Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.

Features

• FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
• Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
• 1 to 1000 V ac or dc
• 0.1 to 200 A ac
• Resistance 1 Ω to 100 kΩ
• Frequency measurement 45 to 66 Hz
• Works with wires up to AWG 4/0 (120 mm2) with a 0.7″ (17.8 mm) jaw opening
• Hold button temporarily freezes the reading for easy viewing
• Easy to read display with backlight

 

Specifications

FieldSense AC Voltage True RMS
Requires Test Leads	No
Range	1000 V
Resolution	1 V
Accuracy	±(3% + 3 counts) 45 to 66 Hz
FieldSense AC Current True RMS
Requires Test Leads	No
Range	200.0 A
Resolution	0.1 A
Accuracy	±(3% + 3 counts) 45 to 66 Hz
FieldSense Frequency (Hz)
Requires Test Leads	No
Range	45 to 66 Hz
Resolution	1 Hz
Accuracy	±(1% + 2 counts)
Volts AC True RMS
Requires Test Leads	Yes
Range	1000 V
Resolution	1 V
Accuracy	±(1.5% + 2 counts) 45 to 66 Hz
Volts DC
Requires Test Leads	Yes
Range	1000 V
Resolution	1 V
Accuracy	±(1% + 2 counts)
Resistance
Requires Test Leads	Yes
Range	1000 V 2000 Ω 20 kΩ 100 kΩ
Resolution	1 V 1 Ω 0.01 kΩ 0.1 kΩ
Accuracy	±(1% + 2 counts)
Safety
Range	1000 V CAT III 600 V CAT IV
General Specifications
Calibration	One year calibration cycle
Jaw Opening	0.7″ (17.8 mm)
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	-22 to 140°F (-30 to 60°C)
Operating Altitude	6562′ (2000 m)
Storage Altitude	32,808′ (10,000 m)
Relative Humidity	0 to 90%, 41 to 86°F (5 to 30°C) 0 to 75%, 86 to 104°F (30 to 40°C) 0 to 45%, 104 to 122°F (40 to 50°C)
Battery Type and Life	2 x AA (IEC LR6) 360 hours continuous Typical; 200 hours using FieldSense
Temperature Coefficient	0.1 x (specified accuracy) /°C for <18 or >28°C
Safety	IEC/EN 61010-1: Pollution degree 2
Electromagnetic Environment	IEC/EN 61326-1: Portable
Dimensions	2.4 x 10.2 x 1.7″ (61.1 x 259.3 x 43.8 mm)
Weight	0.78 lb (350 g)

 

Included:

• T6-1000 Electrical Teste
• PRV240FS Proving Unit
• Attached Test Leads, with 0.16″ (4 mm) Removable Probe Caps
• User’s Manual

Data Sheet

Datasheet for the Fluke T6-1000 Electrical Tester and Proving Unit Kit, 1000 V AC